Hardware

Get to know our product range

Complete kits

Common features

  • Full hand-held spectrometer
  • Plug-and-play solution
  • Sensor module, light sources and electronics integrated
  • Bluetooth communication
  • Software “SenoSoft” for Windows OS to record spectra and test chemometric models
  • WL range: 1200 to 1700nm
  • WL points: 16 equidistant
  • Organic photodiode technology

SenoCorder Solid

  • Contact mode measurements
  • Reflection mode
  • For powders and solids
  • Includes textile identification showcase (chemometric model)

SenoCorder Liquid

  • Cuvette-based measurements
  • Transmission mode
  • For liquids
  • Includes alcohol concentration measurement (chemometric model)

Designed to measure powders and solids the SenoCorder Solid comes to you ready to use. You can expect a plug and play solution with a customer friendly software to test our Senorics technology. This SenoCorder also includes a textile identification showcase for you to try our technology on.

FEATURE: SPEC

Wavelength (WL) range: 1200 – 1700 nm

FWHM: ~25 nm

Number of WL channels: 16

Measurement time: ~6 s

Interface: Bluetooth (via SenoSoft)

Dimensions: 110 x 60 x 50 mm

Supply power: 5 V DC, max 2 A DC

Operating conditions: 10 – 50 °C

Software: SenoSoft

Operating system: Windows 10 and up

Measurement mode: Sample must be in contact to measurement window

Illumination: 2 x tungsten lamps 1.5 W each, integrated

Designed to measure liquids the SenoCorder Liquid comes to you ready to use. You can expect a plug and play solution with a customer friendly software to test our Senorics technology. This SenoCorder also includes a water concentration measurement showcase for you to try our technology on.

FEATURE: SPEC

Wavelength (WL) range: 1200 – 1700 nm

FWHM: ~25 nm

Number of WL channels: 16

Measurement time: ~6 s

Interface: Bluetooth (via SenoSoft)

Dimensions: 80 x 80 x 50 mm

Supply power: 5 V DC, max 2 A DC

Operating conditions: 10 – 50 °C

Software: SenoSoft

Operating system: Windows 10 and up

Measurement mode: Substance must be filled into cuvette. Cuvette must be placed into cuvette holder.

Illumination: 2 x tungsten lamps 1.5 W each, integrated

OEM Hardware components

Common features

  • Communication via Bluetooth or UART
  • Software “SenoSoft” for Windows OS to record spectra and test chemometric models (Bluetooth mode only)
  • C-API for direct, low-level communication (Bluetooth, UART)
  • WL range: 1200 to 1700nm
  • WL points: 16 equidistant
  • Organic photodiode technology

SenoSense Detect

  • pure detector unit
  • external illumination and optics design needed
  • non-contact mode measurements possible
  • reflection and transmission mode possible
  • for any substance

SenoSense Complete

  • detector and illumination unit combined, ready to use sensor system
  • 2 x 1.5W tungsten lamps integrated
  • contact mode measurements
  • reflection mode
  • for powders and solids

With our SenoSense Detect, you receive a pure detector unit with a digital readout of 16 wavelengths by standard electronic interface. This is a good choice for you if you need a ready-to-use detector unit to be integrated into your product.

FEATURE: SPEC

Wavelength (WL) range: 1200 – 1700 nm

FWHM: ~25 nm

Number of WL channels: 16

Measurement time: ~5 s

Interface: Bluetooth, UART

Output: 16 x 16 bit

Dimensions: 50 x 40 x 15 mm

Sensor illumination area: 8 x 10 mm

Mounting options: Standard 4 x screws

Supply voltage: 5 V DC

Operating conditions: 10 – 50 °C

API: C

Operating system: Windows 10 and up

With our SenoSense Complete, you receive a detector and illumination unit combined or in other words: a ready to use sensor system. This is the right choice for you if you are looking for a complete, ready-to-use sensor module including illumination to integrate into your product.

FEATURE: SPEC

Wavelength (WL) range: 1200 – 1700 nm

FWHM: ~25 nm

Number of WL channels: 16

Measurement time: ~6 s (~1 s lamp control)

Interface: Bluetooth, UART

Output: 16 x 16 bit

Dimensions: 50 x 40 x 30 mm

Sensor illumination area: 8 x 10 mm

Mounting options: Standard 4 x screws

Supply voltage: 5 V DC, max. 2 A DC

Operating conditions: 10 – 50 °C

API: C

Operating system: Windows 10 and up

Measurement window: Coated filter glass

Measurement mode: Sample must be in contact to measurement window

Illumination: 2 x tungsten lamps 1.5 W each, integrated